What orientation are the hooty segments printed in? I'm having trouble understanding how they can print with no overhang.
@aonomus Leave the orientation of the segments as it is, like in the attached image. The underside is flattened off to for better contact with the printbed.
There are overhangs, but the printer should be able to handle them.
Printed both models at 150% scale on my Bambu Labs P1S printer using ZYLTECH PLA Gun Metal Silver and Polymaker Polylite PLA Galaxy Black filaments, 0.12 layer, 3 perimeters and tree supports. Printed for the Monday Makes segment of the LM_Show (Twitch stream by @LoyalMoses ).
View one more comment
@shawndoan03_2432991 If you go to the "Details" here there is colored link below the box giving the sizes of the 2 models, it is "big pin and base". That takes you to the model page of the base and pin that fits in the base. The hole in the bottom of these models fits the pin. It is a tight fit and use the "big" versions.
(deleted)
@shawndoan03_2432991 Wow, this looks amazing! Great job!
Thanks again for the remix!
As promised, I printed it, and it came out great.
As you said, removing the supports were a bit of a pain, but with some pliers and patience, it went smoothly