I printed mine in a mix of ASA (red) and PETG (orange and white), with some JB Weld Plastic Bonder to cover up some gaps due to printing glitches.
I also had to file down a chamfer in the bottom front edge of the shelf so that I could fit it in without removing the screws at the top of the electronics panel, and also had to trim and file down part of the box to make room for one of those screws. (The catch with removing those screws is that I'd need remove the T-nuts that they were screwed into, which would require loosening or removing the electronics panel to get to them, which would have been a pain.)
Nice work!! Easy to print and turned out great. Hatchbox PLA Pro +
Hi, do you have the Y_CHAIN_MOUNT (FRAME).3mf but with 3 holes?
View one more comment
@Extra_bitz_271826 Nope, no inserts required.
@ripley ok. i made spacers to lift board so the underside workings dont future issues.
Hey Dan, I love the design, any chance you could do something similar for the PCB Klicky probe?
nice file.
i would like to see you printer.cfg. i can´t set my euclid
Hello, I'm currently printing this for my wife. Do you have the dimensions for the hinge pins and the latch pins?
@ShawnCary_1596798
Sorry about that!
I just added them to the description.
They are 3mm x 30mm bolts or I like to use stainless dowel pins like these:
https://www.amazon.com/gp/product/B07YKZJB6Z?th=1
@DanCernogorsky
Thanks Dan!