It prints and works well. I added it as a part to a door...for a window...on a door. I put parts to hold magnets, although it doesn't need them to stay closed. The holes came out too small on mine for filament to go through, so I used a piece of twist tie instead.
Not sure if anyone can help with this but everytime I go to scale the "pic" down to 144 by 108 (bambu lithophane recommendation) it severely changes the model/breaks it. I have zero fusion skills :/
@HazBambu_2246793after looking at the Fusion360 file I don't think you are going to able to do anything with this. For 1, there are 2 different sketches linked to both objects and one of the objects was moved after the sketch was complete. Secondly, the way this is set up up as soon as you change one parameter nothing else is addressed. There should be a formula in the expression column so that it recalculates the entire model. I am no expert in Fusion360 but have made a few parametric models with it and unless I am missing something this appears to be an incomplete model for parametric use.
