Works like charm! We used the SO-Tech feets before under METOD cabinets because a) sturdier b) cheaper c) different heigths. But without these adapters. Infill 70 % Gyroid
---- Super! Wir haben bereits die SO-Tech Füße unter den METOD Unterschränken verwendet weil a) mehr Tragkraft b) billiger c) verschiedene Höhen möglich. Aber vorher ohne die Adapter. 70 % Gyroid Füllung.
I tried to print it and the model works very good. The measurement markings and fonts look really bad though. After playing with the slicer settings I noticed this is because I print with a 0.6 nozzle. Slicing with a 0.4 nozzle gives much better results. Oh well, it's usable, just doesn't look all that great.
Printed the S40.5-41 to check fitment to a Raptor bottle marketed by U-Pol. Fits perfectly. The Raptor marketing materials says the bottle threads directly onto their spray gun for painting using "European threading". Out of curiosity @DJ_94635 , what organization has the standards for the S series neck finishes?
Have you considered adding a similar attachment point to the center hub. Superglue seems like a soft point for failure as Superglue has poor shear strength. Even a small 1mm screw pilot hole for extra security and a M1x3 self-tapping screw through the elastic?
Scaled to 75% to fit the A1 Mini.
I did the body twice with & without "Detect Thin Walls", I choose without for a smoother look.