Thanks so much! The new Version with the different angle, works perfect on the smaller arm.
Printed all parts @ 60% scale
@toscdesign Thank you for testing! :-)
@CurlyVole_1312498 thanks for the redesign 👍
Printed with 60% for small arm system and works great, thanks!
Great idea and design - I've also found Racing micro drone gate by Julezzz, and was not pleased with the way of joining loop and base, I was nearly finished designing that (however I'm bad with this), and then found your project which was much better than mine :)
I've made a bit smaller (66% of original size) for precise flying with my meteor65, however probably I'll also go for the original size.
Probably I'll design something to be able to join them to have cross pattern with four of them, or line vertical/horizontal patterns of 3-4x. (edited)
View 2 more comments
@Printeyy_1705220 You could probably scale that down, too.
Modified a bit to make the inner hook more rounded, I'll publish the remix later.
View one more comment
@CurlyVole_1312498 Yes I did use a fillet radius finder, but although I get a good measure I tweak it a bit to get the just right curve.
If I get some time tonight I'll upload my fusion360 remix file
@CurlyVole_1312498
Check the remix for the fusion file ;)
https://www.printables.com/model/945031-ikea-svarta-hook/files
@awkwardcarl_1606072 that looks cool with the NASA logo 😎
Thanks for sharing
@ThatPickGuy_201479 Thanks for trying it out! And a nice top surface pattern you got there :)
