ApolloniusFink | Printables.com

DUPLO compatible plate 2x2

published a new model January 7 at 9:59 PM

January 7 at 9:59 PM

1

0

16

DUPLO / Hubelino compatible straight (length 1)

published a new model January 7 at 9:44 PM

January 7 at 9:44 PM

2

0

12

Taper / adaptor for Duplo / Hubelino compatible pillars

published a new model January 6 at 7:29 PM

January 6 at 7:29 PM

4

0

15

Duplo / Hubelino compatible pillar (4x4, 8 high)

published a new model December 22, 2024 at 9:39 PM

December 22, 2024 at 9:39 PM

8

4

57

7

tofo

@tofo_2658422

black - PLA C
Techorange - PETG Spectrum
Printing without supports.
Detail 0.1

Pay attention to cleaning the inner feet - it needs to be careful and not heated after printing, otherwise it will not sit on the blocks.

Duplo / Hubelino compatible pillar (3x3, 8 high)

published a new model December 22, 2024 at 8:54 PM

December 22, 2024 at 8:54 PM

8

0

37

Duplo / Hubelino compatible pillar (2x2, 4 high)

published a new model December 22, 2024 at 8:35 PM

December 22, 2024 at 8:35 PM

8

5

47

H 6

hampus

@hampus_2918472

Thanks! Came out great in black PLA. No supports, but brim just to be sure (haven't tried without). IIRC 10% infill.

The top fits as hard as official Duplo, 5-12 N for the bricks I tried. The bottom is firmer though: 30+ N and you can feel it needs more force. Still very playable, but could potentially take some light tweaking.

Printed another one right after testing 😉