I would add some notes on the details for the print. For USA at 110v using a Vcore 500 this might melt. The bed alone can be over 10 amps. Id suggest using the M16 version, which is LP-16 Version found here: https://www.amazon.com/gp/product/B08169TKZH/
You can scale this model, but an actual model that fits the M16 version would be ideal. Just carful not going to big because the Hex wont stay in place if scaled too high.
@drops_230238 So after cutting my wires..I noticed this is a 4 pin, id recommend a 5 pin to include the bed ground wire. However then you need the LP20 to support more than 5 amps. LP-20 uses a different female part tho. Kinda defeats the purpose if you ground the bed to the frame. Better to pass the wire all the way to the back.
