I love this solution. I had tried another HSW build plate but found that it wasn't oriented for the vertical mounting orientation. This worked perfectly. I love how it hold six plates, and is almost 1/3 thinner than other options. It's really added to my goal of sliming down the footprint of my printer accessories. Well done, nice print!
Is there any chance you can rotate the connectors? I love this design but I have my HSW the other direction and cannot figure out how to edit it myself.
Nice design and printed fine on its back as you suggested. It has just the right amount of spring clamping on the sides to hold the tool firmly, but not too much. Gives a satisfying click on insertion and removal. I printed in PLA but PETG may be even better for the springiness.
@Phil_171875 Awesome, glad it worked!
Printed great works perfect. It also fit my Olight Seeker 3 Pro flashlight pretty well.
This model does a great job of what it advertises, and the issues I have with it are minor.
First, there's a metal bracket on the back of the camera that lines up perfectly with one of the P1Ps belts, causing it to rub against the belt while it prints. This can easily be fixed by cutting the bracket with snips, but I unfortunately don't have any on hand, so I'll have to wait to re-install this.
Second, it is quite difficult to insert the camera into. A lot of chips on the back collide with the bracket, and I had to use a spudger to bend it slightly as I slid it in. With that being said, the tolerances that cause that also are why the camera fits so well in the bracket.
Printed on my Bambu Lab P1P on the 0.20 preset with standard supports
Can this housing work for the V2 as well?
An example print of the super light version. (edited)