@Shalev_1312453 I would not recommend printing in FDM if thats how you're doing it. The tolerances are just too sloppy. I've had people tell me they got it to work, but I've never tried it.. ( see the other comment below. They used their Ender 3 and got it to work with some post processing. )

As stated in the description I used resin and it took some fiddling to get it right. Everyone's printers are going to be slightly different and also different resins will act differently so it might take a few attempts scaling it up or down or making it bigger or smaller in different directions till things fit.

I would recommend doing partial prints testing different settings so you're not waiting hours to find out if it fits or not.

Unfortunately the nature of Printing tighter tolerance parts means everyone has to figure out how their own machine works and what its limits are. I can only provide what has worked for me

@Jwillew_488293 schaut super aus! Wie spielt es sich?

@MarieClaireJa_634487 Es ist ganz in Ordnung, aber kein Vergleich zu einem richtigen! Ich habe noch drei Verlängerungsstücke gedruckt und die Verbindungen müsste man etwas enger Skalieren, damit die Teile auch ohne Kleber gut aneinander halten.