
couldnt find the original maker of this so i put this make on the closest to it
I am A really big book worm and I am loosing a lot of my book marks so I have been using the origami ones and thoes make me loos my place even more because the ones I was uesing went on the corner.
I printed it for my girlfriend because she likes to read but it doesn't go too much down and goes too high I think.
Printed easily. Easier and louder to blow in bursts compared to holding a long sound.
Nice design and a fast print. I printed all 4 in two colors of PLA. The tips break off quickly, but they still work. Great for breaking down cardboard boxes
Made a couple of these for my snow shovels they are out great and work well.
0.6 nozzle. Prints in like 40 seconds. Usable in some Carts, but not everyone uses this Format.
@ART_TOO Why so bitchy? I know that there are different sizes, but there is a shopping cartsystem in Germany, where you have to push the coin into an extra chamber, which is not possible if there is an extra hanger, thats just what i wanted to tell ya.
@Flowsen_795149 why so bitchy? lol
@BernardPiava_2595509 How well has it held up so far?
@Xenofiber_841262 good till now, backside of the wallmount could be a little thicker.
nice design, could you post some examples of it in use?
Work Great !
I just made a remix to make it like a fidget spinner.
https://www.printables.com/model/1107939-fidget-box-opener
Thanks for sharing the step file :)
Awesome model! One criticism: the 1/4 markings can't be accurate, except for one specific material thickness. As the material you're marking gets thinner, this design will cause the 1/4 markings to get closer and closer to the outer edge of the material. If the material being marked is thin enough (say 1/2"), the 1/4 markings on this print could be completely off the material. I would definitely print this and use the 1/2 marking, though.
This looks like a lot of fun to print but the gcodes don't help me because I don't have an mk3. Can you upload the STLs so I can try it on my mini?
@JoeryN_2654212 STL files are added
@ART_TOO Thanks so much!