APE-X 11
APE-X
@APE_X
published a new model February 14 at 2:00 AM
February 14 at 2:00 AM

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model October 25, 2024 at 3:17 PM
October 25, 2024 at 3:17 PM

Printed in Kimya ABS Carbon and PLA Interface supports. Turned out nicely and fits like a glove :)

Thanks so much for the review and the make! Looks excellent and I'm happy you love it!

it just works!™
Printed in PLA using organic support for top part (edited)

Great to see my friend! Thanks so much for the make and review! Means a lot! Glad to se a fellow XTool user! Keen to see what you make with it if you get a chance!

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model September 12, 2024 at 7:00 AM
September 12, 2024 at 7:00 AM

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model August 27, 2024 at 1:24 PM
August 27, 2024 at 1:24 PM

I really like the design. An small suggestion will be to scale the enclosures up like 1%... I printed them with a Prusa Mini Plus and they fit very tight. I had to sand a lot mines 🤣

Otherwise go with the enclosure that is open in the back side, as it fits so tight that there is no room for the air to flow either when close or opening the box. (edited)

@JoseFRomanie_2446441 Thanks so much for the feedback my friend! I'll slightly adjust all the enclosures and post up the updated version!

Krabicky jsou moc pěkně. Po vyzkouseni tisku jedne krabicky a šuplíku doporucuji buď krabici zvětšit, nebo šuplík zmenšit o 1%. Spojit pak krabicky k sobe do drazek je ale skoro nadlidský úkol. Zkousel jsem brousit a frézovat drážky a nakonec Jsem použil gumovou palicku.

View 2 more comments

@APE_X there are already several people with the same problem. would be very grateful for an increase in tolerances

@KiraIvory_2157986 Hell yeah! Onto it now, I’ll print a few myself so I know they are better clearance before posting up the new files. Thanks for the feedback everyone =D

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model July 31, 2024 at 3:03 AM
July 31, 2024 at 3:03 AM

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model June 4, 2024 at 2:25 AM
June 4, 2024 at 2:25 AM

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model April 24, 2024 at 12:24 AM
April 24, 2024 at 12:24 AM

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model April 19, 2024 at 1:42 PM
April 19, 2024 at 1:42 PM

I was watching cable news and guess what I saw in the background of guest Charlie Sykes? I guess this makes your print somewhat famous.

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model April 2, 2024 at 9:49 AM
April 2, 2024 at 9:49 AM

It's an amazing model but can you please add version with no text so I can add my own?

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model January 27, 2024 at 11:46 PM
January 27, 2024 at 11:46 PM

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model December 15, 2023 at 11:12 PM
December 15, 2023 at 11:12 PM

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model November 19, 2023 at 7:09 PM
November 19, 2023 at 7:09 PM

I failed to put supports on it, which it doesn't need anyway, because it took me a lot of work to remove them and it made the slots ugly.
The result is a very fun piggy bank.
Thanks for the design!

@Deadius Thanks for the make and the advice! I'll adjust a few things and see how i can get it to print a bit better!

@fonzy_815871 Thanks so much for the love! Really appreciate you taking the time to upload your make as well!

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model November 1, 2023 at 12:55 AM
November 1, 2023 at 12:55 AM

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model October 24, 2023 at 12:25 AM
October 24, 2023 at 12:25 AM

It's almost perfect! At 40% the top doesn't fit, but otherwise it looks great, it prints easy and it works!

Thanks so much for the make! It looks adorable being so small! Shame about the top not fitting at that size! Make scale it a tad? I'll have a look and see my design and tweak it a bit! Thanks for the feedback!

@APE_X Maybe XY compensation can be tweaked to fit, but I'll be honest, I don't see the top as an essential part of the print for it's current purpose, which is a small trophy ( canvas will be printed separately )

125%
200x150 foto ok
------------------- (edited)

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model September 28, 2023 at 8:38 AM
September 28, 2023 at 8:38 AM

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model September 24, 2023 at 12:58 PM
September 24, 2023 at 12:58 PM

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model July 25, 2023 at 5:37 AM
July 25, 2023 at 5:37 AM

so...
i printed this drawer but i needed to do a WHOOLE lot of sanding to get it to fit just right... Also that little tab at the end doesnt realy help the drawer from sliding past it...
i ended up sticking a bit of tape to kinda help with that...
the issue is that the bac of the drawer also has a fillet....

@RubenQuintan_1278768 Sorry to hear that, I reprinted since and tolerances were spot on for me.

printed well on X1C, would recommend making finger hole on drawer larger for ease of use

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model July 25, 2023 at 4:33 AM
July 25, 2023 at 4:33 AM

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model July 25, 2023 at 4:22 AM
July 25, 2023 at 4:22 AM

Réaliser en pla blanc , pour nettoyer mon plan de travail (edited)

Très pratique, permet de nettoyer mon plan de travail. Pla blanc

Ctrl + Enter to send Enter to add a new line
APE-X 11
APE-X
@APE_X
published a new model July 25, 2023 at 3:58 AM
July 25, 2023 at 3:58 AM

Printed with PLA-CF. Made some minor modifications to the base to enlarge the screw holes, so I could attach this to my 8020 rig. Works great!

The print worked perfectly. I printed it with Prusament PLA Galaxy Black and used the model without the holes.
The mount on a aluminum plate works well so far with regular double sided tape.

The fit is really good.

@LeinmuSe Thanks so much for the feedback! It looks really good in that colour!

Ctrl + Enter to send Enter to add a new line
All items loaded