I've tried quite a few knobs, but this one is by far the best. Thank you so much for this design! I love how I can quickly spin the dial and also click with the same finger. Has really made using the LCD a much more enjoyable experience!
Like another commenter mentioned, the knob was loose at first. I fixed it in Prusa Slicer by importing the model > right click the model > Add part > Box. Then resize the box to make the hole a bit tighter (screenshot included).
Here's a tip that I learned while doing this that might help others: When scaling the box, you can hold control to scale only one side instead of both sides equally.
I've tried quite a few knobs, but this one is by far the best. Thank you so much for this design! I love how I can quickly spin the dial and also click with the same finger. Has really made using the LCD a much more enjoyable experience!
Like another commenter mentioned, the knob was loose at first. I fixed it in Prusa Slicer by importing the model > right click the model > Add part > Box. Then resize the box to make the hole a bit tighter (screenshot included).
Here's a tip that I learned while doing this that might help others: When scaling the box, you can hold control to scale only one side instead of both sides equally.
Atomic Filament Dark Cherry Carbon Fiber PETG, 0.15mm layer height, 0.6mm nozzle, 100% infill. (edited)
I loved it