Hi, may I ask what are these green pieces of some paper in players trays for? (edited)
@persi_541277 it is moisture remover originaly packed with the game components.
It can little low profile, to not scatch the cards, but it can be different distribution. Otherwise nice product.
Hi!
Are your cards sleeved? Or do you know if it works with sleeved cards anyway?
View 2 more comments
@ian_samhain_721808 My apologies, I did not mean to offend. I have made a lot of board game inserts and I get this question a lot so it tends to trigger me more than it probably should. Again, sorry for the tone.
@Mrgigg no worries, apologies accepted!
Does this support the mini expansion?
I made the following adjustments:
* 2 large gold trays instead of 1 + 2 half trays
* split the spacer to fit player aids, mastery and clan patron cards. This allows all cards (customer at the bottom) to be sleeved.
* took the divider out of one of the toppers for the region scoring tiles.
@ChewieHuey_276915 will you post your remix?
Hey there.
Any plans on finishing this insert? i'm only missing boxes for the tiles.
Nicely designed. Printed in transparent PLA, 0.2 layer with concentric infill for the top and grid for the bottom (to add visual texture) for the first one, flat on the plate. Glueing them together without getting glue in the card space is a challenge due to the small dimensions of the edges. I merged the top and bottom in the slicer, adjusted the relative positions and printed the second one upright as one unit. Much more effective for me and no glue needed! I can print the full set of 16 on one plate
My only suggestion is to make the rail on the left side of the cutouts the same width as what can be seen when a card is inserted. Visually, it will look better as well as be much stronger. It won't cover too much of the artwork on the cards. Approximately 3mm. See picture.
A couple tight spots but for such a complex design it’s very well done! Great work!
@tjdesign Awesome! I know it can be a little tight near the top... I tried making the walls smaller but I still missed I guess. Hope it helps with the gameplay!
Printed nicely. Surprisingly smooth when printed at .2 layer height. I would have preferred a fourth division for the hearts, but at least there is a size difference between them.
Fantastic insert. Setting up and putting away the game is a breeze now. I also printed this as a gift and my friend thought it was great.
@tjdesign Also I shared it on this geek list, hope that's ok! https://boardgamegeek.com/geeklist/186909/3d-prints-board-games
Printed in advance. But unfortunately the german version only has a 2d church. And the parts don't fit in this model.
Your 3d version looks really cool.
Amazing idea!
(I bet that won't fit in the box. ;-)) (edited)
@ThomasDN_298996 Thanks!
Printed! Thanks for sharing.
I *did* opt to scale the thickness down to 80% to avoid the spacer being taller than the cutout.
@ThomasDN_298996 Great! I'll have to check my print to see if it does stick out. The height of the print is 2mm.
@3DLEE_316184 2mm is correct. I printed at .2mm layer height and scaled down from 10 layers to 8 so 1.6mm in total.
