does this work
This would be great for single shelves. Could you make one please!!!
View 2 more comments
@3DJake what is the length of the screws?
@JacobMoksnes_1931035 M5x25 should be just fine :)
Would you recommend supports when making the corner main?
@AntonioMaldo_1424180 Yes you need supports for both corner pieces. Certainly for the screw hole part, you might get away with bridging the peg holes but I printed those with support so everything is nice and straight for the pegs which often fit very snuggly.
Thank you for providing this.
For me the print orientation was unclear.
Threads on the bottom: Needs support in the threads.
Funnel on the bottom: Needs support for the topmost ring and the very shallow overhang.
If the topmost ring and the shallow overhang would be optimised for printing (steeper overhangs) , this would be a no-support model if printed standing on the funnel.
