Discover Creators' Clubs
AKinferno
@AKinferno
19 members
Free my models 14de38dc
Work in A/V industry. Technical Manager and Control ...
Michal Fanta
@MichalFanta
24 members
I'm addicted to 3Dprinting. And my portfolio of 3D models is growing every day.
AndreasJoskaSutanto
@AndreasJoskaSutanto
105 members
I make FlexiDinos – Vienna based Graphic designer, Printmaker and Artist
tecnoculebras
@tecnoculebras
15 members
https://www.youtube.com/channel/UCeraLcxl9CDdOTeMdACZkIg/
Free my models 2a38...
Featured Store Models
Design Contests
Shoe Hacks
133 entries | May 29 – June 14, 2026
CORE One Skins
123 entries | May 14 – June 14, 2026
Community Articles
It's been more than two years since I released Dummy 13 here on Printables. That was the culmination of what I called the “13 Series,” a set of models allowing anyone to customize their own humanoid action figure.
Since then, I've explored in a few d
Since then, I've explored in a few d
February 13, 2026
Some folks have already seen some of my announcements, updates and discussions about a Prusa CORE One Mini on various platforms like Reddit. After a few setbacks up until November 2025, the project was put back to the drawing board for the third time
May 24, 2026
Greetings everyone. So, after more then 4 months of work, the DHD is finally finished. Or rather my part is done. It is printed and assembled and painted. Now it will go to the customer for the electronic fitting, lights and sounds so that it could b
October 4, 2025
Greetings my friends.
So, I wanted to try this new Article feature and show you the progress on my DHD.
So, I wanted to try this new Article feature and show you the progress on my DHD.
August 21, 2025
EasyPrint Changelog – April 30, 2026
🚀 New Features
Sequential PrintingYou can now choose to print whole objects sequentially (one by one)! This highly anticipated feature includes a smart auto-arrange function that carefully positions objects to pre
🚀 New Features
Sequential PrintingYou can now choose to print whole objects sequentially (one by one)! This highly anticipated feature includes a smart auto-arrange function that carefully positions objects to pre
April 30, 2026
It's a little meta, we know, but what better way to announce our new Articles feature than by writing an article about it? We hate cooking recipes where you first have to hear about the author's grandma's life story and only get to the ingredients an
August 10, 2025
I’ve never been much of a “car guy,” but now that I drive my Mazda 3 (red, obviously) I have to admit - I love this car! It doesn't have any ultra fancy features, but the original owner did select the wireless key fob option. And it is great. Well, m
August 8, 2025
This past weekend was 3DPrintopia 2025! It's one of the world's largest annual gatherings of 3D printing hobbyists, creators, and companies - and it happens to be a short drive from Lucky 13 home base.
After attending last year's event, I decided thi
After attending last year's event, I decided thi
September 29, 2025
3D printing provides the opportunity to make things that are not easily produced by other technologies, and literally change our possibilities. Thanks to the ingenuity and creativity of the community surrounding 3D printing, there are many interestin
November 4, 2025
When we introduced official Brand profiles on Printables, the goal was to change how big companies think about 3D printing. Why not give fans the real files? Replacement parts, accessories, cosplay props — made available directly, instead of forcing
September 22, 2025
How did we get here?
So, for anyone following along the Prusawire project, you may know this already, but let's start from the beginning.
I came up with the idea of Prusawire just before Core ONE kits were about to begin shipping. I had just recently
So, for anyone following along the Prusawire project, you may know this already, but let's start from the beginning.
I came up with the idea of Prusawire just before Core ONE kits were about to begin shipping. I had just recently
January 5, 2026
With Bondtech's INDX coming to the Prusa CORE One, multi-nozzle printing is becoming the new standard. But more colours mean more spools... and more chaos on your desk.
Introducing INBXX: The ultimate, fully configurable filament management system de
Introducing INBXX: The ultimate, fully configurable filament management system de
November 21, 2025
I’m incredibly honored to be nominated for the Printables Designer of the Year Award!
If you’ve enjoyed using my models, printed something that helped you, or simply liked my approach to design, I’d truly appreciate your support.
Your vote would mean
If you’ve enjoyed using my models, printed something that helped you, or simply liked my approach to design, I’d truly appreciate your support.
Your vote would mean
December 18, 2025
Black Friday deals are live on Printables! For the entire month, enjoy 30% off a wide selection of paid models from our talented designers.
📅 October 30th – November 30th, 2025🌐 Exclusively on the Printables Store
Time to fire up your 3D printer! 🔥
D
📅 October 30th – November 30th, 2025🌐 Exclusively on the Printables Store
Time to fire up your 3D printer! 🔥
D
November 4, 2025
This update is a bit different from the previous technical ones. Most of the recent work on the CORE One Mini wasn’t about the mechanical side - it was about identity. At some point during a project like this, you realize that if you want the machine
May 24, 2026
Printables Changelog – February 10, 2026
🚀 New Features & Major Improvements Enhanced Search ExperienceBy default, search results now mix both free and exclusive (Store/Club) models, giving you a complete view of available models. We've also added ha
🚀 New Features & Major Improvements Enhanced Search ExperienceBy default, search results now mix both free and exclusive (Store/Club) models, giving you a complete view of available models. We've also added ha
February 10, 2026
The MK3.251 is a printer that combines two MK3 series printers. The housing was made using two MK3 aluminum frames and a 3030 aluminum frame. The tool head is the same as the MK3S. Other new parts needed are two extended 8mm shafts and belts for the
March 10, 2026
Time for another update on the CORE One Mini - and this one once again feels like a proper milestone. While I skipped ahead a bit earlier to work on the CoreXY assembly and the heatbed assembly, it’s now time to focus on the back assembly, which is m
April 12, 2026
This update is a bit different - no single big milestone this time, but rather a collection of smaller improvements, refinements and progress across multiple areas. The kind of work that isn’t always the most exciting to show, but is absolutely essen
April 26, 2026
Kasaka’s Blade is one of those props that looks simple for about five seconds 😅 But once you break the build down into stages, it’s actually really easy to make one yourself.In this post, I will show you how I 3D printed Kasaka’s Blade from Solo Leve
May 14, 2026
Thank you so much EVERYONE for the huge amount of support! I never imagined that I would be in the running for an award this big, ITS AMAZING! Vote for finalists now: https://www.printables.com/awards/2025
January 8, 2026
Hello! I have been quiet in the last few weeks, but for a good reason: I finished a project I've been ideating for a long time, and it's finally live. StlFactory is a platform I built for small print shops and individuals who want to easily create cu
June 6, 2026
Hey everyone!
One day as a kid I went to the newspaper stand to check do they have any new comics for me. At that time we didn't had Marvel or DC stuff, we mostly had Italian published stuff like Dylan Dog, Zagor, Martin Mysteree etc... I know, you n
One day as a kid I went to the newspaper stand to check do they have any new comics for me. At that time we didn't had Marvel or DC stuff, we mostly had Italian published stuff like Dylan Dog, Zagor, Martin Mysteree etc... I know, you n
August 25, 2025
Another milestone: the heatbed assembly is now feature complete. This part of the build required quite a few adjustments and customizations, but overall the integration of the components worked out nicely. While the metal parts need another small ite
March 15, 2026
This week marked another step toward finishing the exterior and material side of the CORE One Mini. The focus shifted toward plastics, fitment refinement, and finalizing the sheet metal and enclosure components.
Some of the originally planned materia
Some of the originally planned materia
May 10, 2026
If there is one thing this stage of the CORE One Mini reminded me of, it's this: prototyping is not always fair and square. And in this case, that is meant quite literally.
I spent about a full day cutting each profile to length and making the cutout
I spent about a full day cutting each profile to length and making the cutout
February 22, 2026
Greetings everyone. So, I have started to work on this extremely nice Shuttle from the Avatar movies. The Valkyrie Shuttle. After some work, the Base Model is finaly done. The model will be some 60cm long.
September 16, 2025
Another milestone: the CoreXY assembly is done - more or less - which means most of the major components related to the printer’s kinematics are now in place.
The CoreXY plate itself ended up being a bit of a mashup between the CORE One, the Core One
The CoreXY plate itself ended up being a bit of a mashup between the CORE One, the Core One
March 29, 2026
Could AI be integrated responsibly in the 3D model-creating process? Can a model bear the “AI” tag without being immediately dismissed as slop? AI generated 3D models have flooded every repository web platform. You probably have encountered them here
September 11, 2025
This is about making an anemometer from scratch, helplessly overengeneering it and having fun with a ton of boring napkin maths needed for this.
Along the following jurney i learned a lot about designing and claibrating anemometer. I encountered a a
Along the following jurney i learned a lot about designing and claibrating anemometer. I encountered a a
April 13, 2026
You can easily create your own custom 3D jigsaw puzzle within PrusaSlicer! This guide includes the whole workflow.
I was inspired to create 3D jigsaw puzzles by this article on Prusa Blog. However, it was originally written in 2019, and I found some
I was inspired to create 3D jigsaw puzzles by this article on Prusa Blog. However, it was originally written in 2019, and I found some
September 4, 2025
A lot has happened in the meantime - this is the point where the CORE One Mini project finally left the comfortable world of CAD and stepped into the slightly more painful reality of sparks, sharp edges and metal shavings. Hours were spent on tasks t
February 11, 2026
300 K downloads!
Today I reached this number of downloads of my 3D models on Printables.com.
When I started on the original Prusaprinters website, I would never have believed it. I have been working on Printables for 4 years, since February 2022, whe
Today I reached this number of downloads of my 3D models on Printables.com.
When I started on the original Prusaprinters website, I would never have believed it. I have been working on Printables for 4 years, since February 2022, whe
March 15, 2026
I really love using PrusaSlicer creatively to customize objects or even make new ones. Obviously, the primary purpose of the program is to slice existing models to be printed as accurately as possible to the original 3D file. But, with just a little
August 11, 2025
This is a quick guide on how to setup single extruder multi material printing specifically for the purpose of first layer elements like decorative patterns or labels.
For this technique to work, we need a model that has elements with a height of two
For this technique to work, we need a model that has elements with a height of two
February 21, 2026
One of the biggest challenges in this iteration turned out to be the back panel. What looks like a simple flat part at first quickly became one of the most constrained areas of the entire build.
Because of the overall size reduction and the tighter f
Because of the overall size reduction and the tighter f
January 25, 2026
The idea behind my GEN2 Decor Series was to bring the modular storage system into the home or office, opening up endless possibilities for customization and style. The Chevron Series has always been special to me because it marked my first step away
October 5, 2025
While finalizing the XY motion system for the CORE One Mini, an issue came up with linear rail availability.
The distance between the linear rail holders is fixed at exactly 245 mm. The originally intended rail, a THK SRS12GN, is available in 220 mm
The distance between the linear rail holders is fixed at exactly 245 mm. The originally intended rail, a THK SRS12GN, is available in 220 mm
January 29, 2026
Short story: I went to the store, there were some MOTU toys and I went down memory lane and started remembering all the cool stuff from my childhood so I made Orko :) then I re-made Mini He-Man... :D
August 18, 2025
Hello Everyone 🚀 Big News! CN3D x BigTreeTech Collaboration 🛠️
After seeing our custom approach to upgrading the Nebula Extruder, the team at BigTreeTech reached out to us directly! 🤝
We’re excited to announce that we’re working together to turn our
After seeing our custom approach to upgrading the Nebula Extruder, the team at BigTreeTech reached out to us directly! 🤝
We’re excited to announce that we’re working together to turn our
August 5, 2025
Preamble
I am a 3d printing hobbyist that shares his created models for free on Printables and Makerworld.People seem to appreciate these models and, while absolutely not planned, started to follow me more and more since the 2 years I am doing this.A
I am a 3d printing hobbyist that shares his created models for free on Printables and Makerworld.People seem to appreciate these models and, while absolutely not planned, started to follow me more and more since the 2 years I am doing this.A
April 14, 2026
When you imagine home servers or people's Network Attached Storages, what comes to mind? probably something like this:
April 24, 2026
I’ve released a new modular scraper designed for 3D printer bed cleaning.It works with standard Stanley blades as well as several 3D‑printed blade options included in the model.You can also design your own blade shapes or even make blades from other
January 23, 2026
I really like the 3D printable badges that Printables.com gives for reaching different badge milestones so I printed the ones I achieved. I wanted to share my makes of these badges so putting them in an article seemed liked the best way to do it. To
February 17, 2026
Safety Warning: You’re responsible for your own safety. You’ll be working with hot parts and tools that can seriously burn you or others, or set fire to things around you.
November 23, 2025
3D FDM/SLA Printing, Post Processing and Spray Paint Booth Environment - Air Quality Issues/Solution
Air Quality can be a significant issue (toxicity, odour and heat) when 3D printing, cleanup and post processing take place indoors.
Background Initially when I had just 1 small 3D FDM printer (Prusa MK2.5s) air quality was not as big an issue as dra
Background Initially when I had just 1 small 3D FDM printer (Prusa MK2.5s) air quality was not as big an issue as dra
March 25, 2026
Competition models in the Philips OneBlade & Kingdom Come competition.
At first I didn't know how to react to this topic, I don't use a razor for shaving. But I was interested in the medieval theme, I really like it. I learned to use texture on the m
At first I didn't know how to react to this topic, I don't use a razor for shaving. But I was interested in the medieval theme, I really like it. I learned to use texture on the m
March 2, 2026
Organic supports in PrusaSlicer are called tree supports in other slicers - and they really do look like a tree trunk and branches. This inspired me to model a Benchy tree, entirely within PrusaSlicer. The trick is to adjust the supports so that they
August 18, 2025
Star Wars spaceships 3D models
I asked my first supporter on Printables what model I should model for him for his support.
He asked me for a model of the
Razor Crest Star Wars Ship
I asked my first supporter on Printables what model I should model for him for his support.
He asked me for a model of the
Razor Crest Star Wars Ship
February 3, 2026
News from the Blog
Fake Studio Lighting on your 3D Prints using Filament Mixing and a Free App
Last week, we introduced the Prusa ColorMix, a tool for combining existing filaments into new colors. Today, we'll show you how to use our new free web app to add realistic ColorMix shading to any model! I was very excited to contribute... The post Fake Studio Lighting on your 3D Prints using Filament Mixing and a Free App appeared first on Original Prusa 3D Printers.
Prusament Resin Model+: New generation resin with safer health profile and better impact resistance
Meet Prusament Resin Model+, our reformulated SLA resin with faster exposure, better impact resistance, and reduced pigment sedimentation! The Prusament Model Resin has long been a flagship of our SLA lineup. It offers reliable and fast printing in detail, and most of... The post Prusament Resin Model+: New generation resin with safer health profile and better impact resistance appeared first on Original Prusa 3D Printers.
Print with dozens of colors: Our new open-source ColorMix for EasyPrint and PrusaSlicer
For the past few months, the 3D printing community has been poking at a very interesting question: what if a multi-material printer were not limited to the colors physically loaded on it? And we must say it right now: This is a... The post Print with dozens of colors: Our new open-source ColorMix for EasyPrint and PrusaSlicer appeared first on Original Prusa 3D Printers.
Contest: CORE One Skins
In March, designers from 3Demon created a set of great-looking skins for the CORE One L, turning the printer into three very different things: a TARDIS, a dark steampunk machine, and a small mushroom forest scene. We liked the idea a lot. The CORE... The post Contest: CORE One Skins appeared first on Original Prusa 3D Printers.